Access

View meta data

Get data via HTTP/OPeNDAP

To get a year dataset please use one of the links below to download the wget script:
2013, 2014, 2015, 2016, 2017,

Description

10-minute average (except precipitation: 10-minute sum) values at the end of the measurement interval. The data acquisition rate of (1) , (3), (5), and (7) is 1 Hz. The average (sum) values represent the corresponding parameter at sensor level. At levels without measurements of a specific parameter missing values of -999.0 are set at the corresponding position in the file. In daily dataset files following level 1 products are included: (1) Air temperature at sensor level (2m): average offset correction is applied (see instrument specifications). (2) Current air temperature quality flag: 0 (undefined_quality), 1 (missing_value), 2 (quality_bad), 3 (quality_dubious), 4 (value_is_interpolated), 5 (quality_good), processed with internal QA routines by Deutscher Wetterdienst (DWD) described by Beyrich and Adam (Berichte des Deutschen Wetterdienstes, 230, 55 pp., 2007). (3) Relative humidity at sensor level (2m): a nonlinear correction is applied (see instrument specifications). (4) Current relative humidity quality flag: see (2). (5) Wind direction at sensor level (10m). (6) Current wind direction quality flag: see (2). (7) Wind speed at sensor level (10m): The representative wind speed measurement is selected from the anemometers of 3 booms at the meteorological tower in dependence of the wind direction at the corresponding level. (8) Current wind speed quality flag: see (2). (9) Precipitation amount (1m): Based on an internal sampling rate of ~ 0.17 Hz, the Pluvio Ombrometer System determines a filtered (to prevent result falsification by e.g. wind influence) precipitation intensity every minute. No additional corrections were applied. (10) Current precipitation amount quality flag: see (2). (11) Air pressure (1m): The data acquisition rate is ~ 0.1 Hz. No additional corrections were applied. (12) Current air pressure quality flag: see (2).

Limitations: none
Provenance: Meteorological data of Richard-Assmann Observatory, Lindenberg (DWD)
Comments: The coordinates specify the position of the 99 m tower at the Falkenberg boundary layer field site, where the 10 m wind speed information originates from. 10 m wind direction as well as 2 m air temperature/humidity measurements are performed at a 10 m mast ~70 m south-south-east of the meteorological tower. Precipitation and air pressure sensors (each at 1 m measuring height) in turn are located in the container facility area ~90 m north-east of the tower.

• Source: Vaisala: HMP45D PT100 (IEC751 1/3 DIN Class B)
• Descriptive Instrument location: The sensors are located at the Falkenberg boundary layer field site. PT100 and HUMICAP: about 90 m north-east of the 99 m tower. Wind sensors: mounted at the 10m level of the 99 m tower and at the top of the 10m mast, 70 m south-south-east of the 99 m tower. Richard-Assmann-Observatorium, Deutscher Wetterdienst (DWD)

• Source: Vaisala: HMP45D (HUMICAP 180)
• Descriptive Instrument location: The sensors are located at the Falkenberg boundary layer field site. PT100 and HUMICAP: about 90 m north-east of the 99 m tower. Wind sensors: mounted at the 10m level of the 99 m tower and at the top of the 10m mast, 70 m south-south-east of the 99 m tower. Richard-Assmann-Observatorium, Deutscher Wetterdienst (DWD)

• Source: R. M. YOUNG COMPANY: Wind Monitor-SE (Model 09101)
• Descriptive Instrument location: The sensors are located at the Falkenberg boundary layer field site. PT100 and HUMICAP: about 90 m north-east of the 99 m tower. Wind sensors: mounted at the 10m level of the 99 m tower and at the top of the 10m mast, 70 m south-south-east of the 99 m tower. Richard-Assmann-Observatorium, Deutscher Wetterdienst (DWD)

• Source: Adolf Thies GmbH & Co: 4.33303.22.000 cup anemometer
• Descriptive Instrument location: The sensors are located at the Falkenberg boundary layer field site. PT100 and HUMICAP: about 90 m north-east of the 99 m tower. Wind sensors: mounted at the 10m level of the 99 m tower and at the top of the 10m mast, 70 m south-south-east of the 99 m tower. Richard-Assmann-Observatorium, Deutscher Wetterdienst (DWD)

• Source: OTT Hydromet GmbH: Pluvio (DWD version)
• Descriptive Instrument location: The sensors are located at the Falkenberg boundary layer field site. PT100 and HUMICAP: about 90 m north-east of the 99 m tower. Wind sensors: mounted at the 10m level of the 99 m tower and at the top of the 10m mast, 70 m south-south-east of the 99 m tower. Richard-Assmann-Observatorium, Deutscher Wetterdienst (DWD)

• Source: Vaisala PTB220A
• Descriptive Instrument location: The sensors are located at the Falkenberg boundary layer field site. PT100 and HUMICAP: about 90 m north-east of the 99 m tower. Wind sensors: mounted at the 10m level of the 99 m tower and at the top of the 10m mast, 70 m south-south-east of the 99 m tower. Richard-Assmann-Observatorium, Deutscher Wetterdienst (DWD)

• PID: de.koeln.rrzk/amd.de.sups/rao.mets00.l1.any
• Project: HD(CP)2
• Level: 1
• Updated version: 00
• File format: NETCDF3_CLASSIC
• Convention: CF-1.6
• Average File Size Uncompressed: 0.017 Mb
• File name: sups_rao_mets00_l1_any_v[VV]_[YYYYMMDDhhmmss].nc
• Start: 2013-01-01
• End: 2017-12-31

Name	Dimension	CF standard_name	long_name	Unit
hur	time,	relative_humidity	Relative Humidity At Sensor Level	1
hur_flag	time,	relative_humidity status_flag	Current Relative Humidity Quality At Sensor Level	missing
pa	time,	air_pressure	Air Pressure At Sensor Level	Pa
pa_flag	time,	air_pressure status_flag	Current Air pressure Quality At Sensor Level	missing
precip	time,	precipitation_amount	Precipitation amount	kg m-2
precip_flag	time,	precipitation_amount status_flag	Current precipitation_amount Quality	missing
ta	time,	air_temperature	Air Temperature At Sensor Level	K
ta_flag	time,	air_temperature status_flag	Current Air Temperature Quality At Sensor Level	missing
wdir	time,	wind_from_direction	Wind Direction At Sensor Level	degree
wdir_flag	time,	wind_from_direction status_flag	Current Wind Direction Quality At Sensor Level	missing
wspeed	time,	wind_speed	Wind speed At Sensor Level	m s-1
wspeed_flag	time,	wind_speed status_flag	Current Wind Speed Quality At Sensor Level	missing

Deutscher Wetterdienst, Meteorologisches Observatorium Lindenberg / Richard-Assmann-Observatorium

Volker Lehmann (volker.lehmann@dwd.de)

Udo Rummel (udo.rummel@dwd.de)

Frank Beyrich and Wolfgang Adam,Site and Data Report for the Lindenberg Reference Site in CEOP-Phase 1

For non-commercial use only. This data is subject to the HD(CP)2/SAMD data policy to be found at https://doi.org/10.25592/uhhfdm.9823  and in the HD(CP)2/SAMD Observation Data Product Standard https://doi.org/10.5281/zenodo.1741363 .